Restart Or Shut Down The Nas; Hardware System Reset - Cisco NSS32 Administration Manual

NAS Maintenance

Restart or Shut Down the NAS

Restart or Shut Down the NAS
STEP 1
STEP 2

Hardware System Reset

NOTE
Cisco Small Business NSS300 Series Smart Storage Administration Guide
Follow the steps below to restart or shut down the NAS.
Choose Administration > Power Management from the Navigation menu. The
Power Management window opens.
To restart the NAS immediately, click RESTART. To shutdown the NAS immediately,
click SHUTDOWN.
You can also press the power button for 5 seconds to turn off the NAS. The NAS
beeps once and shuts down immediately.
There are two ways to reset the NAS system hardware: basic and advanced.
Hardware system reset as described in this chapter is different from the
Administration > Restore to Factory Default command. See
Default, page 93 more details regarding the Restore to Factory Default
command.
5
Restore to Factory
242