Daewoo DWD-FD1411 Instruction Manual page 14

* SYNTHETIC PROGRAM
1
2
3
4
Note
• If you want to change the setting during operation, press the Start/Hold button to hold the operation and
press the button you want.
• Only '30', '40' and '60' ˚C washing temperatures are selectable with the Synthetic programme.
• 1400rpm of spin velocity is NOT selectable with Synthetic program
• 'Prewash', 'Rinse+', and 'Crease Care' wash options are selectable with this programme.
• The appropriate amount of laundry for Synthetic program is below 1.5kg.
Downloaded From WashingMachine-Manual.com Manuals
Put the laundry in the drum.
Then close the door.
• In the detergent compartment, put the powder into the main wash and pre-wash
sections. Softener should be poured into the middle section of the compartment and
be below the 'MAX' level.
• Put detergent into the pre wash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
• The LED shows only '---' and all Program Lights turn on.
Select the 'Synthetic' programme using the programme selection dial.
• Water temperature '40' ˚C, spin '800' rpm and rinse '3' times are selected
automatically.
• If you want to change the water temperature, the spin velocity or add wash options
(Prewash, Rinse+, Crease Care), press each button.
Press Start/Hold button.
• The washing machine will start operating by locking the door and supplying water.
14