Daewoo DWD-FD1411 Instruction Manual page 12

* COTTON PROGRAMME
1
2
3
4
Note
• If you want to change the setting during operation, press the Start/Hold button to hold the operation
and press the button you want.
• 'COLD', '30', '40', '60' and '95' ˚C washing temperatures are selectable with the cotton programme.
• 'Prewash', 'Rinse+', and 'Crease Care' wash options are selectable with this programme.
Caution!
• If you select washing temperature '95' ˚C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash
water instead of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
Downloaded From WashingMachine-Manual.com Manuals
Put the laundry in to the drum.
Then close the door.
• In the detergent compartment, put the powder into the main wash and pre-wash
sections. Softener should be be poured into the middle section of the compartment
and be below the 'MAX' level.
• Put detergent into the pre wash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with detergent.
Press the Power button.
• The LED shows only '---' and all Program Lights turn on.
Select the 'Cotton' programme using the programme selection dial.
• (If you press the Start/Hold button after pressing the power button without selecting
a programme, the 'Cotton' program is selected as default program.
• Water temperature '40' ˚C, spin '800' rpm and rinse '3' times are selected
automatically.
• If you want to change the water temperature, spin velocity or add wash options
(Rinse+, Crease Care), press each button.
Press Start/Hold button.
• The washing machine will start operating by locking the door and supplying water.
12