Table of Contents
Advertisement
4.
Use the rotary knob to set
a later end time.
The self cleaning function
switches on and off at the
appropriate times. The
clock reappears once
self cleaning has started.
The cleaning time has
elapsed
Cancelling the setting
Notes
When the oven has
cooled
Note
44
Set end time
Switch off the function selector when the S symbol
goes out.
Switch off the function selector. Wait until the
S symbol goes out before opening the oven door.
The cleaning level cannot be changed once the
cleaning operation has been started.
Wipe away any remaining ash from inside the oven
using a moist cloth.
Under normal use, it is usually sufficient to clean the
oven every two to three months. Only about
2.5 4.7 kilowatt hours are required for each
self cleaning process.
The special heat resistant enamel and the shiny parts
in the oven may become dull or discoloured over time.
This is normal and does not affect the function. Do not
use coarse scouring pads or strong cleaning agents
to remove such discolorations.
Advertisement
Table of Contents
