Hitachi DZ-GX20MA Service Manual page 106

Adjustment > Creating Reference Data
6-1-4 Settings when Creating Reference Data
When the connections for creating reference data are complete, set the DVD video camera/recorder
and test equipment as follows:
1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data.
2) Set the power switch to "VIDEO": After that operate the DVD video camera/recorder while
watching the LCD monitor screen.
3) Press the MENU button to display the camera function setup screen.
4) Use the / /
5) Use the / /
6) Use the / /
7) When reset is complete, use the above procedure to operate the
Demo Mode in the Initial Setup menu to "Off": Forgetting to set it to "Off" will cause a problem
during creation of reference data.
8) Press the MENU button to restore the normal display.
Information:
The following table shows the menu status after the above settings:
The settings for Date Setup are not shown in the table below, since they do not have any meaning
when creating reference data.
Item
Camera Functions Setup
Program AE
White Bal.
EIS
Dig. Zoom
MIC Filter
Flash
(*1)
Recording Functions Setup
VIDEO Mode
Quality
16:9
Input Source
Self Timer
OSD Output
/ buttons to choose "Initial Setup", and then press the
/ buttons to choose "Reset", and then press the
/ buttons to choose "YES", and then press the
Setting
Auto
Auto
On
×40
Off
Auto
FINE
FINE
Off
CAMERA
Off
Off
/
Item
LCD/EVF Setup
LCD Brightness
EVF Brightness
Color Level
EVF Display
Initial Setup
Beep
Power Save
Record LED
Language
Demo Mode
*1: DZ-GX20MA only
6 - 5
button.
button.
button.
/ / buttons and set
Setting
Auto
On
Off
On
English
Off