Creating Reference Data - Hitachi DZ-GX20MA Service Manual

Adjustment > Creating Reference Data

6-1-7 Creating Reference Data

Start the setup program.
For subsequent operation, operate the PC mouse while watching the PC monitor screen.
Information:
It takes approx. 20 minutes to create reference data.
The following shows the times required for each item:
Matrix: Approx. 10 minutes
White Balance: Approx. 10 minutes
White Balance Abs: Approx. 30 seconds
Preparation:
1) Point at light box without chart, filling the screen.
2) Prepare the C12 light balancing filter (step-up rings):
Attach it during setup.
Procedure:
1) Choose MATRIX on the SETUP MENU screen.
2) Click the EXECUTE button on SETUP MENU screen to
start setup.
3) The ATTACH THE FILTER dialog will appear during
setup. Attach the C12 light balancing filter over the lens
of DVD video camera/recorder, and then click the OK
button in ATTACH THE FILTER dialog.
4) The REMOVE THE FILTER dialog will appear during
setup.
Remove the C12 light balancing filter from the lens of
DVD video camera/recorder, and then click the OK
button in REMOVE THE FILTER dialog.
After that, the ATTACH THE FILTER dialog and
REMOVE THE FILTER dialog may occasionally appear:
Reattach the C12 light balancing filter and remove it
each time.
5) When setup is complete, the SETUP FINISHED dialog
will appear: Click the OK button in dialog to restore the
SETUP MENU screen.
When setup is complete with the C12 light balancing
filter attached, remove the C12 light balancing filter.
6) Choose WHITE BALANCE on the SETUP MENU
screen.
7) Repeat steps 2)-5).
SETUP MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
2
ATTACH THE FILTER dialog
CHECK
! Attach The Filter.
REMOVE THE FILTER dialog
CHECK
! Remove The Filter.
SETUP FINISHED dialog
FINISHED
SETUP FINISHED.
OK
SETUP MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
7
6 - 10
SETUP MENU
1
Matrix
White Balance
White Balance Abs
EXECUTE RETURN
3
OK
4
OK
5
SETUP MENU
Matrix
6
White Balance
White Balance Abs
EXECUTE RETURN