Program - Hitachi DZ-GX20MA Service Manual

Adjustment > Setups for Adjustment
6-2-6 Starting and Terminating Adjustment Program
Make sure that the connections are correct, the power switch on DVD video camera/recorder is set
to "VIDEO", and the DC power supply for DSP-R jig is turned on. The adjustment program will not
start unless the connections for adjustment are correct, and the DVD video camera/recorder or
DSP-R jig is powered.
Information:
1) Display ×××× on subsequent PC screen shows the model name.
2) The numbers on PC screens show the operational procedure.
(1) Start
1) Start the PC. If the PC has already started, terminate all
other applications.
2) Start Explorer, and double-click the "MAP2005W.EXE"
file in map05w folder to start the adjustment program.
3) Once the adjustment program has started, the
COMMUNICATION PORT SETTING screen will
appear.
4) Check the communication port to which the RS-232C
cable is connected, and then choose the radio button of
corresponding port on COMMUNICATION PORT
SETTING screen.
5) Click the OK button on the COMMUNICATION PORT
SETTING screen, and then proceed with the MODEL
SELECT screen.
Note:
If the dialogs on right appear, perform the following
troubleshooting:
When the power or connection error dialog appears:
A connection is incorrect or power is not turned on.
Make sure that all connections are correct and that
power is supplied to the reference data creating
device or DSP-R interface jig.
Clicking the OK button will finish the program:
After solving the problem, restart the program.
When the communication port error dialog appears:
There was a mistake in selecting communication port.
Check the communication port.
Clicking the OK button will finish the program:
Select the communication port again after restart.
COMMUNICATION PORT SETTING
screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MANUAL ADJUSTMENT PROGRAM
4
5
POWER OR CONNECTION ERROR
dialog
ERROR
MAY OCCURE ON CABLE OR JIG OR CAMCORDER.
!
POWER FAILURE OR CONNECTION ERROR!
COM PORT ERROR dialog
ERROR
!
COM PORT ERROR
6 - 17
for SERVICE STATION
COM PORT SETTING
PORT
PORT 1 PORT 4
PORT 5
PORT 2
PORT 3 PORT 6
EXIT
OK
Copyright (C) HITACHI, Ltd 2003
OK
OK