Mounting An Additional Lens; Procedure - FLIR T420 User Manual

13 Handling the camera

13.7 Mounting an additional lens

Note Do not touch the lens surface when you mount an infrared lens. If this happens,
clean the lens according to the instructions in 28.2 Infrared lens, page 162.

13.7.1 Procedure

Follow this procedure:
1. Push the lens release button to unlock the lens cap.
2. Rotate the lens cap 30° counter-clockwise (looking at the front of the lens).
3. Carefully pull out the lens cap from the bayonet ring.
4. Correctly position the lens in front of the bayonet ring.
27
#T559879; r. AO/35410/35410; en-US