6 Use Bluetooth
devices
With this clock radio, you can listen to audio
from Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
•
Make sure that your Bluetooth device is compatible
with this product.
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•
This product can memorize a maximum of 4 paired
devices. The fifth paired device will replace the first one.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
1
Press SOURCE repeatedly to select
Bluetooth mode.
» [BT] (Bluetooth) flashes on the display.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3
When [Philips AJT5300] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password "0000".
Philips AJT5300
If you cannot find [Philips AJT5300]
•
for pairing, press and hold
seconds to enter pairing mode, and
then try again.
» After successful pairing and connection,
[BT] (Bluetooth) stops flashing, and
the clock radio beeps twice.
To disconnect the Bluetooth-enabled device:
•
Press and hold
•
Disable Bluetooth on your device; or
•
Move the device beyond the
communication range.
To connect another Bluetooth-enabled device:
1
Press and hold
disconnect the currently connected device.
» The clock radio enters Bluetooth
pairing mode.
2
Connect another Bluetooth device.
Bluetooth icon behavior
Flashing quickly
Flashing slowly
Solid on
Play audio from Bluetooth-
enabled device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the clock radio.
•
You can press
resume play.
for two
for two seconds;
for two seconds to
Description
Waiting for pairing
Connecting
Connected
to start, pause or
EN
9