Download Print this page

Get Started; Install Batteries; Connect Power; Set Time - Philips R3305 User Manual

Advertisement

3 Get started

Always follow the instructions in this chapter in
sequence.

Install batteries

The batteries can only back up clock and alarm
settings.
Caution
Risk of explosion! Keep the batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Batteries contain chemical substances, so they should
be disposed of properly.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.

Connect power

Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
Risk of electrical shock! When you unplug the power
adaptor, always pull the plug from the socket. Never
pull the cord.
Use only the AC power adapter specified in the
manufacturer or sold with this unit.
EN
4
Note
The type plate is located at the bottom of the clock radio.

Set time

Note
You can only set time in standby mode.
1
In standby mode, press and hold SET TIME
for 2 seconds.
2
Press HR to set hour and MIN to set
minute, then press SET TIME to confirm.
» The time is set.

Advertisement

loading

This manual is also suitable for:

R32053000 series