Configuring The Controller - R&S esu Quick Start Manual

R&S ESU
Manual Operation of the R&S ESU with XP Remote Desktop
If necessary, click Select Remote Users... and select users created on the R&S ESU
who are to be given access to the R&S ESU also via Remote Desktop.
Confirm the setting with OK.
The R&S ESU is now ready for connection setup with the Remote Desktop program of
the controller.

6.7.3 Configuring the Controller

Before Remote Desktop can be operated, the TCP/IP protocol must be created on the
controller and Remote Desktop Client must be installed.
The settings on the Remote Desktop Client of the controller must be made before the
connection with the R&S ESU is set up. The procedure is as follows:
Press the Windows key or CTRL+ESC.
Select Programs - Accessories - Communications - Remote Desktop Connection.
The Remote Desktop login screen will appear.
Quick Start Guide 1302.6163.62 - 04
The user account under which configuration is carried out is
automatically enabled for Remote Desktop.
With Windows XP, Remote Desktop Client is part of the operating
system and can be accessed via Start - Programs - Accessories -
Communications - Remote Desktop Connection.
For other versions of Windows, Microsoft offers the Remote Desktop
Client as an add-on.
LAN Interface
6.27