Skoda citigo Owner's Manual page 77

The brake pedal must be depressed before setting into position D from posi-
tion N.
- Manual gearshift (Tiptronic)
M
Further information » page 75.
With driving mode set, the vehicle will not start up
If the vehicle does not start off, the problem may be that the selector lever is
not completely in the selected position. In such an instance, press the brake
pedal and put the selector lever into the required position.
Faults in the automatic gearbox
In the event of a fault in the automatic gearbox, warning lights may light up in
the instrument panel » page 31,

An error on the automated manual transmission can become noticed, for ex-
ample, by the following.
›
Only certain gears are selected.
›
The reverse gear R cannot be used.
Manual gearshift (Tiptronic)
Fig. 80 Selector lever: manual shifting/information display

Read and observe and
Tiptronic mode makes it possible to manually shift gears on the selector lever.
The gearshift indicator must be observed when changing gear
Switching to manual shifting when the vehicle is stationary
›
Depress the brake pedal.
›
Press the selector lever twice to the left in the spring-tensioned position.
Automated transmission.

on page 74 first.
» page
Switching to manual shifting during driving
›
Press the selector lever towards the left in the spring-tensioned position in
the direction of the arrow and set in position M. The selector lever position
you have engaged appears in the instrument cluster display
Shifting up gears
›
Press the selector lever forwards
Shifting down gears
›
Press the selector lever backwards
Note
It may be beneficial, for example, when travelling downhill, to use manual
■
shifting of gears. Shifting to a lower gear reduces the load on the brakes and
hence the wear on the brakes
When accelerating, the gearbox automatically shifts up into the higher gear
■
just before the maximum permissible engine speed is reached.
If a lower gear is selected, the gearbox does not shift down until there is no
■
risk of the engine overrevving.
Starting-off and driving

Read and observe
Starting off
›
Start the engine.
›
Firmly depress and hold the brake pedal.
›
Press the selector lever towards the left in the spring-tensioned position in
the direction of the arrow
›
Release the brake pedal and accelerate.
Stopping (while the car is moving)
›
Fully depress and hold the brake pedal and bring the vehicle to a stop.
›
Keep holding the brake pedal until driving is resumed.
The selector lever position N does not have to be selected when stopping for a
short time, such as at a cross roads.
Kick-down
26.
The Kick-down function allows you to achieve the maximum acceleration of
your vehicle while driving.
When the accelerator pedal is fully depressed, the Kick-down function is acti-
vated in any forward driving mode.
» Fig. 80 .
+
» Fig. 80 .
-
» page 72, Information on braking.
and on page 74 first.
» Fig. 79 on page 74 and insert into position D .
Starting-off and Driving
» Fig. 80 .
1

75