Skoda citigo Owner's Manual page 137

Replacing the bulb for the licence plate light
Fig. 130 Remove the number plate light/replace the bulb

Read and observe and
›
Insert a slotted screwdriver into the gap in the arrow area
remove the lamp.
›
Remove the lamp from the bumper.
›
Turn the bulb holder anti-clockwise and remove in the direction of the ar-
row » Fig. 130 - .
›
Remove the faulty bulb from the socket.
›
Insert a new bulb into the socket.
›
Replace the holder with the bulb into the lamp housing and turn in a clock-
wise direction to the stop.
›
Insert the light into the opening of the bumper with its left edge. Lightly
press it until the spring latches.
CAUTION
Ensure that the vehicle paintwork and the tail lamp are not damaged when re-
moving and installing the tail lamp.
on page 132 first.
» Fig. 130
Tail light
Fig. 131 Removing the tail lamp assembly
-  and
Fig. 132 Replacing bulbs

Read and observe
Removing
›
Open the boot lid.
›
Fold the rear seat backrest forward
›
Remove the boot cover
›
Pry off cover » Fig. 131
1
›
Below locking edge
pull the locking on connector
›
Press the locking mechanism
›
Hold the light firmly and unscrew the plastic nut
›
Carefully remove the light from the body and place it on a clean, smooth sur-
face.
and on page 132 first.
» page 53, Seat backrests.
» page 61.
in the arrow area.
, insert the screwdriver » page
3
in the direction of the arrow.
2
and remove the connector
4
5.
Fuses and light bulbs
117, Vehicle tool kit and
.
2

135