Modes And Features Setup - Denver MT-704 User Manual

Modes and Features Setup

System settings
With no disc in the player, press [SETUP], the screen will display the SETUP MENU.
Press [UP],or [DOWN] to move the highlighted band to the desired item, then press
[ENTER] to display sub-menu. In the sub-menu, press [RIGHT] to enter choices
selection area. You can press [UP], or [DOWN] to move the highlighted band in all areas.
Press [ENTER] to validate your selection. Press [LEFT] to escape the sub-menu. Any
time press [SETUP] to exit the SETUP MENU.
NOTE: Make sure the player is in STOP mode before setting the SETUP menu.
Below are some examples of frequently used settings availabletotheend user.
Example 1 :Setthescreen ratio mode
1. Press [SETU P] to access the SETUP M E N U. Press [DOWN] and Then press
[ENTER] to access the TV Type. The screen willshowthe following image:
Advanced Features
-10-
Remote Control Operation
TIME
During playback, press TIME, and the [Track Search] menu will display as follows:
-:--:--
00/00
- -
Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm.
Press TIME again , the [Disc Search] menu will display as follows:
00/00
- -
Advanced Features
Notes: Time searches for an exact time in
the movie.
01/01
In Title/Chapter mode, you cannot
- -
SELECT a value outside the range of the
total number of titles or chapters
For some DVD discs, the Search
function is unavailable.
-:--:--
-15-
.