Basic Playback; Basic Operation; Advanced Features - Denver MT-704 User Manual

Remote Control Operation
During DVD or CD playback, press and hold
The player will review the disc at 2, 4, 8,16 and 32 times normal
speed as follows:
X2 X2
Press PLAY to resume normal playback.
During DVD or CD playback, press and hold
The player will review the disc at 2, 4, 8,16 and 32 times normal speed as
follows:
X2 X2
Press PLAY to resume normal playback.
Press PREV(
Press NEXT(

Advanced Features

to scan forward.
X4 X4 X8 X8 X16 X32
to scan in reverse.
X4 X4 X8 X8 X16 X32
) to skip to previous chapter or track.
) to skip to the next chapter or track.
-16-

Basic Operation

Preparation before playing:
STEP 2 - Push OPEN either on the
front panel or remote control. When
the tray is opened, place the disc on the
tray with the label side up. Push OPEN
again to close the disc tray.
MODE :
Push the MODE button once, the following menu show in the
display screen: setup menu Color, Contrast, Brightness, Rest
and push the MODE again select the Parameter you wanted.
Press the Left button or Right
till available.

Basic Playback

STEP 1 - Push POWER to
start the player. The DVD
logo appears on the TV
screen.
STEP 3 - Press the ENTER button
on the front panel or remote con-
trol. The player will automatical-
ly read and identify the disc, and
begin playback.
button adjust the parameter
-9-