Denver MT-704 User Manual page 13

Modes and Features Setup
2. Press [RIGHT] to enter the sub-menu on the right side of the screen. If you
want to change the age control grade to PG, press [UP] or [DOWN] until the
highlighted band moves to the item "3 PG". The player will ask you to enter a
password, ifthe ex-factory password has never been modified, you can press the
number buttons "9922 " in the remote control, then press [ENTER]. Or type in your
personal code.
3.Press [SETUP]toexitthe SETUP MENU
Example 3:Setting the On Screen Display language
1 .Press [SETUP] to access the SETUP MENU. Press [ENTER] until the
highlighted band moves to the item "OSD LANG" as shown below:
2. Press [RIGHT] to enter the sub-menu on the right side of the screen.
Choose the desired On Screen Display (OSD) language using the [UP] or
[DOWN] buttons and then press [ENTER] tovalidate the selection. The
language ofthe player menuswill now be as chosen.
3.Push [SETUP]to exitthe SETUP MENU
Advanced Features
English
Danish
Swedish
German
Portuguese
-12-
Remote Control Operation
0-10+ keys
These keys are used to input the time, as well as
title, chapter and track numbers.
When a numeric item is displayed on the screen,
press the 0-10+ keys to select the desired entry,
and press ENTER to confirm.
A-B
During playback, press A-B to select point A.
Press it again to select point B. The player will repeat the section from A
to B automatically.
Press A-B third time to cancel A-B repeat and clear points A and B.
Note: 1. During CD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
2. This function is subject to the disc.
Press STOP( ) during playback to stop and hold playback.
Press PLAY/PAUSE(
pressed STOP.
Note: T he screen saver will automatically turn on i
stopped about 5 minutes(when Screen Saver is set to on).
Advanced Features
) to resume playback from the point you
f playback is
-13-