Advertisement
SETUP Menu Setting
General Operation&General Setup Page
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to
enter
the next level submenu or confirm your
selection.
3.Press
to enter the submenu or returen to the previous menu
4.Press
to highlight the desired menu.
To exit from the menu
Press SETUP
The settings will be stored in the player's memory
even if the player is switched off.
General Setup Page
The options included in General Setup page are:" TV Display","Angle
Mark","OSD lang","Captions","Screen Saver".
Follow the steps below:
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
Go To General Setup Page
1.Press SETUP to enter the setup menu.
2.Press
to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
SETUP Menu Setting
General Setup Page
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
Set Angle Mark
1.Press
to highlight 'Angle Mark'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
On:Enable Angle M ark.
Off:Disable the current angle setting display.
OSD Lang
You can select your own preferred language seetings.This DVD
system will automatically switch to the selected language whenever
you load a disc.If the language selected is not available on the disc,
the disc's default language will be used instead. The OSD language
in the system menu will remain once selected.
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
Set OSD Language
9
Dolby
Dolby
PS
On
On
Off
ENG
On
On
.
to highlight the selected item.
Dolby
PS
On
ENG
English
French
On
German
On
Italian
Spanish
Portuguese
- - General Setup Page - -
TV Display
PS
Angle Mark
On
OSD lang
ENG
Captions
On
Screen Saver
On
Set TV Display Mode
1.Press
to highlight 'TV Display'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
Normal/PS
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
Wide
If you have a wide-screen TV.
1.Press the
keys to highlight 'OSD Lang'.
2.Enter its submenu by pressing
3.Move the cursor by pressing the
4.Select a language and press ENTER.
Dolby
Normal/PS
Normal/LB
Wide
.
to highlight the selected item.
.
to highlight the selected item.
Advertisement
