Adding/Replacing Hard Disks; Extending A 2-Disk Unit - Bosch DIP-5042EZ-0HD Installation Manual

DIVAR IP 5000
Notice!
We recommend backing up the configuration frequently so that
recent backups are always available if required.
To back up the configuration:
1.
2.
3.
4.
9.4

Adding/replacing hard disks

Observe the following prerequisites when adding or replacing
hard disks.
Prerequisites:
–
9.4.1

Extending a 2-disk unit

You can extend a unit with additional hard disks.
To add hard disks to a 2-disk unit:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
In the DIVAR IP configuration, expand System, then click
Service.
To back up the configuration, click Back up. A dialog box is
displayed.
Click Save. Where the configuration is saved depends on
the browser settings.
Note: If you want to select a specific target directory for
the backup file, click the arrow to the right of the Save
button, then click Save as.
To find the backup, click the Windows Start button, enter
downloads in the search box, then press ENTER.
A dialog box containing the backup file is displayed.
For RAID configuration, all hard disks of the unit must have
the same capacity
Turn off the unit by pressing the power button.
Insert the new hard disks into the chassis bay, making sure
that the drive carrier handle is completely closed.
Turn on the unit by pressing the power button.
Maintaining the system | en
2016.03 | V1 | DOC
27