Bosch DIP-5042EZ-0HD Installation Manual page 5

Divar ip 5000
Hide thumbs Also See for DIP-5042EZ-0HD:
Table of Contents

Advertisement

DIVAR IP 5000
Bosch Sicherheitssysteme GmbH
Operate the device only from the type of power source
indicated on the label.
Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
Use only attachments/accessories specified by the
manufacturer.
Protect all connection cables from possible damage,
particularly at connection points.
Do not defeat the safety purpose of a polarized or
ground‑type plug.
Permanently connected devices must have an external,
readily operable mains plug or all‑pole mains switch in
accordance with installation rules.
Pluggable devices must have an easily accessible socket-
outlet installed near the equipment.
Unplug the unit from the outlet before cleaning. Follow any
instructions provided with the unit.
Any openings in the unit enclosure are provided for
ventilation to prevent overheating and ensure reliable
operation. Do not block or cover these openings.
Leave approximately 5 cm (2 inches) clearance to the next
object.
Do not place the unit in an enclosure unless proper
ventilation is provided, or the manufacturer's instructions
have been adhered to.
Do not use this unit near water, for example near a bathtub,
washbowl, sink, laundry basket, in a damp or wet
basement, near a swimming pool, in an outdoor installation,
or in any area classified as a wet location.
To reduce the risk of fire or electrical shock, do not expose
this unit to rain or moisture.
Never push objects of any kind into this unit through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electrical shock.
Safety | en
5
2016.03 | V1 | DOC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dip-5042ez-2hdDip-5042ez-1hdDip-5042ez-4hdDip-5044ez-2hdDip-5044ez-4hdDip-5044ez-1hd ... Show all

Table of Contents