Entering The Service Software On A P80 Console - Precor AMT12 base Service Manual

Entering the Service Software on a P80 console

Procedure:
1. The Welcome screen will be the first screen you see when you approach the P80 console. Press
the Pause button and continue holding it down while you double press (prior to version 1.1
software release) or single press (version 1.1 or after software release) in sequential order an X
configuration on the Volume and Channel key pad
Up, Channel Down). See Diagram 8. Release the Pause button when done pressing the arrows.
Note: The keypad X configuration sequence should not be faster than 1 second between
each key stroke. Any speed faster than 1 second may result in an unsuccessful access to the
sign-in screen.
Diagram 8
2. The sign-in screen will be displayed. Type in the technician access code (5,1,7,6,5,7,6,1) and press
OK.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Channel Up, Volume
( Down, Volume
Page 15