Healthrider N40 User Manual page 8

7. Attach the Seat Frame (28) to the Frame (1) with three
M8 x 25mm Button Screws (45) and three M8 Split
Washers (41).
8. Turn the Seat Knob (11) counterclockwise and remove
it. Next, insert the Seat Post (5) into the Seat Frame
(28). Then, press the Seat Post Cap (54) into the lower
end of the Seat Post.
Align one of the adjustment holes in the Seat Post (5)
with the indicated hole in the Seat Frame (28). Insert
the Seat Knob (11) into the Seat Frame and the Seat
Post, and turn the Seat Knob clockwise until it is tight.
Make sure that the Seat Knob is inserted into one
of the adjustment holes in the Seat Post.
9. Attach the Seat (12) to the Seat Post (5) with four M8
Locknuts (10) and four M8 Split Washers (41). Note:
The Locknuts and the Split Washers may be preat-
tached to the underside of the Seat.
7
45
41
45
8
28
9
8
28
41
1
45
41
5
Adjustment
Holes
11
Hole
54
12
5
41
10
41
10