Healthrider N40 User Manual page 7

4. Attach the Handlebar (15) to the Upright (13) with two
M8 x 38mm Button Screws (9).
5. The Console (16) requires four "D" batteries (not
included); alkaline batteries are recommended. Press
the tab on the battery door and remove the battery
door. Insert four batteries into the Console as shown.
Make sure that the batteries are oriented as shown
by the markings on the battery door. Then, reattach
the battery door.
6. Hold the Console (16) near the Upright (13). Connect
the console wire to the Upper Wire Harness (36).
Insert the excess console wire and Upper Wire
Harness (36) down into the Upright (13). Next, attach
the Console (16) to the Upright with four M4 x 16mm
Screws (49). Do not pinch the wires.
4
5
Batteries
6
49
7
15
9
13
16
Batteries
Door
16
Console
Wire
36
Do not pinch
the wires
during this
step
13