Healthrider N40 User Manual page 6

2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (6) with two M10 x 75mm
Carriage Bolts (30) and two M10 Locknuts (33).
3. While another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (36)
to the Lower Wire Harness (55).
Carefully pull the excess Upper Wire Harness (36) out
of the top of the Upright (13), and slide the Upright onto
the Frame (1). Do not pinch the Wire Harnesses (36,
55). Attach the Upright with three M8 x 25mm Button
Screws (45) and three M8 Split Washers (41).
2
33
3
41
45
6
33
6
1
Do not pinch the
Wire Harnesses
(36, 55) while
attaching the
Upright (13)
13
45
41
36
55
1
30