Step 2: Connect To Your Novopro Device - Delta NovoPRO User Manual

3.1.2 Step 2: Connect to your NovoPRO device

Once you have setup presentation session parameters, you are ready to start or join a presentation
group with your NovoPRO.
Function
Copyright © 2015 DELTA Electronics, Inc. All rights reserved.
1. Projection Mode:
Video Playback: Select this option for a higher
frame rate screen mirroring and to turn on audio
transmission.
Presentation: Select this option for document
presentation or browser content presentation. The
audio will be automatically set to off. Two
additional drop-down configurations, Visual
Quality and Screen Refresh Rate, will be enabled.
2. Visual Quality:
High: This setting yields the best visual quality but
has the most latency and may result in longer
video delay.
Normal: This setting yields the normal visual
quality with the normal CPU consumption.
3. Screen Refresh Rate:
High: This setting yields the enhanced visual
quality but results in higher CPU consumption.
Normal: This setting yields the normal visual
quality with the normal CPU consumption.
4. Check for updates:
Click to check whether Novo Desktop Streamer is
the latest. If not, initiate an upgrade process.
Description
NovoPRO
Connect to your
Click the button. If you are the first participant, this will
start a presentation group on your
the first participant, you will be joining a presentation group.
After your Desktop Streamer is connected successfully to your
NovoPRO
, you will see the connection tab light up
If you are the first participant, you will see that your PC's
on-screen display is wirelessly mirrored on your projector or
TV display. You can also slide the PIN requirement switch to
OFF or ON to enable the use of an access PIN code for the
presentation group.
device.
NovoPRO
. If you are not
.
Page 18