Configure Novopro System Remotely - Delta NovoPRO User Manual

5.2 Configure NovoPRO system remotely

You can remotely configure your NovoPRO device through Novo Desktop Streamer. Click the
button after launching Novo Desktop Steamer, and select "Device Manager".
Please follow the steps below to access the functions described above.
Copyright © 2015 DELTA Electronics, Inc. All rights reserved.
Set edition:
Click on the edition name shown on the top left corner of the
NovoPRO home screen. This will bring up the edition selection
window. Select either Corporate Edition or Education Edition, then
click Confirm to make the edition change official, or click Cancel to
abort the edition change.
The main difference between these two editions are as follows:
Corporate 1. All participants can project screen contents
Education directly onto the NovoPRO screen.
2. Moderator on/off function.
3. Tool bar:
a) PC/MAC – Supports NovoScreenote.
b) iOS/Android Tablets – Supports Screenshot
Edition: 1. The moderator can preview the screen of any
Edition: participant without permission.
2. Tool bar:
a) PC/MAC – Supports all functions.
b) Chromebook/iOS & Android Tablets –
and Share.
Supports all functions.
Page 136