Technical Specifications - AEG BSS 4814 Instruction Manual

English
40
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the INPUT button (1) repeatedly until "USb" is
shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
controls".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
Description of the controls
NOTE:
Your Bluetooth playback device has to support the follow-
ing functions.
(9)
You can pause and continue music playback. Press again to
continue playback.
NOTE: USB Operation
• Pause mode cannot be shown in the display for techni-
cal reasons.
• When in pause mode, the selection of the next, or
previous track is not possible.
(12)
Press 1 x = Restart of the song from the beginning.
(not with USB)
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song.
(5)
Press to skip to the next song and the following songs.
Cleaning
CAUTION:
Do not submerge the device in water.
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
Troubleshooting
Fault Cause
Unit cannot Unit crashes and
be operated. "hangs".
No audio Speaker is not paired
signal via the to the audio source.
Bluetooth
connection
Volume too low
Speaker Pairing does not
cannot be work
connected
Audio source is
switched off
Bluetooth is swit-
ched off at the audio
source.
Bluetooth version is
not supported.

Technical Specifications

Model: .................................................................................BSS 4814
Power supply: ..............................................................230 V~ 50 Hz
Power Consumption:............................................................. 100 W
Protection class: ................................................................................II
Net weight: ............................................Sound bar approx. 1.5 kg
............................................Subwoofer approx. 3.2 kg
Radio component:
Frequency range: .................................... FM 87.5 ~ 108 MHz
Bluetooth
Bluetooth support: ........................................................V2.0 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocols: ....................................................................A2DP/AVRCP
The right to make technical and design modifications in the
course of continuous product development remains reser-
ved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Solution
Disconnect from the
mains for around
5 seconds. Then switch
the unit on again.
Perform a factory
reset. see page 38
"Reestablishing factory
settings"
Check whether a
connection exists. If
necessary, pair the
speaker again to the
audio source.
Increase the volume on
the speaker
Increase the volume on
the audio source.
Check whether the
audio source supports
the A2DP protocol.
Switch on the audio
source
Switch on the Blue-
tooth function in the
audio source.
Use a different play-
back unit.