Cleaning The Outside Of The Scansnap - Fujitsu ScanSnap S1100i Basic Operation Manual

Cleaning the Outside of the ScanSnap

Clean the outside of the ScanSnap in the following procedure.
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened with
Cleaner F1/mild detergent.
ATTENTION
l Never use paint thinner or any other organic solvents. The shape or color may be changed.
l When cleaning the ScanSnap, prevent liquids from entering the ScanSnap.
l It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the
cloth with moderate quantity. Wipe off the cleaner completely with a soft cloth to leave no
residue on the cleaned parts.
Cleaning the Outside of the ScanSnap
Cleaner F1 or
Cloth Mild Detergent
91