Encoder Configuration - Sencore DMG 3200 User Manual

The Coders View contains the following information:
Slot
Type
Service
Input Bitrate
[Mbps]
Output
Bitrate[Mbps]

8.2 Encoder Configuration

The encoder modules have input ports that take a digital input signal, in the HD-SDI and SDI
format, and convert this signal into a compressed transport stream. One SDI input can receive
one video channel and multiple audio channels.
The encoder modules can, in addition to the main video, produce a low resolution version of the
video – PiP (picture in picture). The PiP video is multiplexed with the same audio as the main
service. The resulting PIP service is then also available to select as an output service. PCR is
embedded on the PIP video PID.
The HD-SDI encoder module with 2 channels supports both HD-SDI and SD inputs. The SDI
encoder module with 4 channels supports only SD inputs.
Page 184 (306)
DMG 3200/3100/3000 – User Manual
Figure 8.1: Coders View
Slot in which encoder is placed
Type of coder module.
Encoder: Number of services generated by the encoder module.
Transcoder: The number of transcoded services.
The input bit-rate to Transcoder modules. Nothing is reported for
encoders.
Total bit-rate including PSI/SI, transmitted to the backplane. The bit-
rate may increase when a service is copied to multiple outputs.