Channel Configuration - Sencore SDI2X User Manual

Configuration and status for this feature is found near the top of the SMPTE control
panel.
Setting Range
HDMI Output Enabled
Disabled
Primary Input Channel 1
Channel 2
Channel 3
Channel 4
5.1.2

Channel Configuration

Click the configuration cog below the channel title ribbon to open the configuration
window. The user has two settings to control, Alias and Direction.
Setting Range
Alias Up to 25 characters
SDI → IP
Direction
IP → SDI
IP Format SMPTE 2022-6
SMPTE 2110
Page 25 (61)
SDI2X – User Manual
Desciption
Allows the user to view the stream present on
the channel via the HDMI port.
Selects the channel that will output via the HDMI
port. Only available if channel direction is IP →
SDI.
Description
The user can assign a defining name or title to
the stream processing path. This label is only
available to the SDI2X interfaces; it will not be
incorporated into the video stream data.
This setting represents the video processing
path direction. It will always be shown as (Input)
→ (Output).
Select between processing as SMPTE 2022-6
or SMPTE 2110.