Sencore DMG 4100 Quick Start Manual

In The Box
or
2RU or 1RU chassis with modules
Power cord
(1 x for single power
2 x for dual power)
Quick Start Guide

Getting Started

• Install the hardware
• Connect the power supply(ies) to the power outlet using the cable(s) provided
• On each power supply located at the back of the chassis, a green LED will indicate that the power is active
Quick Start Guide
DMG 4100/DMG 4200

Before Getting Started

This guide is designed to aid the quick installation of your Sencore
equipment. If you experience problems following these procedures or
require further information regarding your head-end, refer to the User
Manual.
Note: Illustrations in this guide may differ slightly from actual software.
Necessary materials and tools
• Ethernet cable
• Control Port IP address
• Input and output cables
Unpacking and handling procedures
• Save the original packaging materials in case you need to return
the equipment
• Health and safety: the equipment is heavy, observe occupational
health and safety rules when handling
System requirements
• Rack size: 19"
• Height: 2RU or 1RU
• Ventilation: Ensure that there is enough space at the front and
back of the unit
• Browsers: Mozilla Firefox, Microsoft Internet Explorer, Google
Chrome
Technical Support
• Refer to your support agreement or contact Sencore's support
team
Warranty/Software Upgrades/Training
• Contact Sencore