Table of Contents
Advertisement
1. Connect as Fig 12-2(RS232 serial cable is connected between COM port of PC and MON port of
TEST JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3
rd
, 4
th
of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1
12.4 Procedure
1. Copy the file to C:\Cm_Gsm_Multi
2. Copy the files of((Windows XXX)MFCD DLL, vsflex7l_ocx_regist to C:\Cm_Gsm_Multi\dll,ocx
3. Select MFCD DLL of your computer OS
4. Click on "vsflex7l_ocx_regist"
5. Click on "Multi_HK reg"
6. Connect as Fig 12-2 (RS232 serial cable is connected between COM port of PC, in general.)
7. Run HK_30exe to start calibration.
8. Click "Logic Operation" of "SETTING" menu bar
9. Set PORT (using RS232 cable) that PC can communicate with the phone
10. Select "LOGIC MODE" that you want
Logic mode: 1-> Calibration only
2-> Auto test only
3-> Cal & Auto
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. AUTO CALIBRATION
st
ON state
- 149 -
LGE Internal Use Only
Advertisement
Table of Contents
