Advertisement
The manufacturer assumes no liability for uses other those described in the operating instructions, or for any unauthorised alterations to the tool.
These operating instructions and warnings should be read carefully and kept in an easily accessible location close to the tool. Non-observance of these
warnings may result in accidents, injury or risks to your health.
1.
Keep your work area in proper order.
Always return the soldering tool to it's stand when not in use. Do not place any materials near the hot soldering tools.
2.
Protect yourself against electrical shocks.
Avoid touching grounded parts with your body, eg. pipes, heating radiators, stoves or refrigerators.
3.
Keep children at a distance.
The Soldering Station is not intended for use by young children or infirm persons without supervision. Young children should be
supervised to ensure that they do not play with this soldering station.
4.
Store your soldering tool in an appropriate place.
When not in use the soldering tools should be stored in a dry location, out of the reach of children, preferably in a locked
cabinet. Switch off soldering tools when not in use.
5.
Do not overload your soldering tool.
Use the soldering tool only with a 12 volt supply.
6.
Use the appropriate soldering tool.
Don't use a soldering tool whose performance is not adequate for your work. Never use the soldering tool for purposes other
than those for which it was designed.
7.
Wear suitable work clothes.
There is a danger of burning yourself with HOT liquid solder. Wear the corresponding protective clothing in order to protect
yourself against burns.
8.
Protect your eyes.
Wear safety glasses when working with solder and with bonding agents. It is particularly important to observe the warning notices of the
bonding agent manufacturer. Protect yourself against solder spatter. There is a danger of burning yourself with HOT liquid solder.
9.
Use a soldering vapour suction device.
If devices for solder vapour suction are available, ensure that these are connected and correctly used.
10.
Do not use the cord for purposes for which it is not designed.
Never carry the soldering tool by the cord. Don't use the cord to pull the power plug from the socket. Protect the cord from heat, oil and sharp
edges.
SAFETY INSTRUCTIONS
4
Weller Tech Sheet Product Code: 060586 Issue A 24/05/05
Advertisement
