Apply a small amount of 242® Blue Loctite® onto the pinch bolt.
8
Use a T8 TORX® wrench to thread the pinch bolt into the lever body.
9
Use a torque wrench and a T8 TORX bit socket to tighten the bolt to
2.7-3.2 N·m (24-28 in-lb).
Use a T8 TORX wrench to install a new binder bolt plug.
10
Press the bladder into the reservoir cap so that the bladder is properly
11
seated and flush with the reservoir cap.
242 Blue Loctite
T8 TORX
2.7-3.2 N•m (24-28 in-lb)
T8 TORX wrench
T8 TORX wrench
20 mm or 15 mm Thru Axle
RS Lever Blade Installation
22 m
25