Counter Display; Setting The Time Code - Panasonic AG-UX90 Operating Instructions Manual

Recording

Counter display

You can change a counter display that indicates how much time has elapsed during recording or
playback.
COUNTER

RESET

Press the COUNTER button to switch the counter display.
≥ The display will be switched in the following order: Time Code # User Information* # Recording
Counter # Off.
Counter display
Time Code
User Information*
Recording Counter
* This is displayed only when [REC MODE] is set to [AVCHD].

Setting the Time Code

Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame)
≥ The number of frames (frame count per second) varies depending on the frame rate in
[REC FORMAT]. (l
TC 00:00:00:00
(l 77) UB 00 00 00 00
(l 78) (In Recording Mode)
0:00:00 or SCN 0:00:00
(In Playback Mode)
SCN 0:00:00
≥ In Recording Mode, display will change depending on the
setting of the [REC COUNTER].
≥ In Playback Mode, display will return to SCN 0:00:00 for
each scene.
147)
Frame rates
50.00p/50.00i/25.00p
Indications
(l
- 75 -
A COUNTER button
B RESET button
147)
Frame
0 to 24