Table of Contents
Advertisement
Preparation
Using the LCD monitor/Viewfinder
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted.
The viewfinder is turned on when the LCD monitor is retracted.
Switching between the LCD monitor and viewfinder
displays
Select the menu.
MENU
: [OUTPUT SETUP]
[LCD]:
The LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is
not turned on.
[EVF]:
The viewfinder turns on. The LCD monitor does not turn on.
∫ To change the setting with a USER button
You can change the settings of the LCD monitor and Viewfinder by registering [LCD/EVF OUTPUT]
to a USER button.
≥ This function is registered to the USER7 button by default.
≥ Please refer to page
When the recording screen is displayed, press the USER button to which [LCD/
EVF OUTPUT] is registered.
≥ Switches the setting each time the button is pressed.
[LCD]
[EVF]
← →
≥ The setting is also applied to the [LCD/EVF OUTPUT] menu setting.
≥ [LCD] will be selected when the LCD monitor is extracted.
(l
40)
[LCD/EVF OUTPUT]
#
79
for details about setting the USER button.
# desired setting
- 32 -
Advertisement
Table of Contents
