Time Stamp - Panasonic AG-UX90 Operating Instructions Manual

[PRE-REC]
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
[ON]/[OFF]

[TIME STAMP]

You can stamp the date and time of recording on the images you record.
[ON]/[OFF]
appears on the screen.
≥
≥ The display mode and format of the date and time of recording to be stamped vary depending on
the settings for [DATE/TIME] and [DATE FORMAT].
≥ The month of the date and time of recording is recorded in English.
≥ In the following cases, even when [TIME STAMP] is set to [ON], the date and time of recording
are not displayed:
j When [REC FORMAT] is set to [SA 576/50.00i]
j When [DATE/TIME] is set to [OFF]
j During Freeze Frame
j In Variable Frame Rate Mode
≥ Even when [VIDEO OUT OSD] is set to [OFF], the date and time of recording are displayed on
the external monitor screen.
≥ The date and time of recording displayed during [TIME STAMP] recording and the date and time
displayed during the playback of the image may not exactly be the same.
[TCG]
Sets the way the time code will move.
[FREE RUN]/[REC RUN]
[TC PRESET]
Initial value of the time code can be set.
[UB PRESET]
≥ Set [REC MODE] to [AVCHD].
User Information can be set.
(l 86)
(l 91)
(l 118)
(l 76)
(l 77)
(l 147)
(l 77)
- 164 -
(l 171)
(l 147)
(l 91)