Table of Contents
Advertisement
Clip metadata (continued)
∗ The COUNT value is indicated as a four-digit
number. The COUNT value is incremented each
time a new clip is captured if clip metadata has
been read in and TYPE has been selected as
the recording method.
The COUNT value can be reset using the
following procedure.
Touch YES for the CLIP COUNTER RST item
in the setting menu RECORD SETUP screen to
reset the COUNT value to 1.
Using the Counter
Counter display
You can display a counter that indicates how much
time has elapsed during shooting or playback.
1
Press the COUNTER button.
Each time you press the button, the display
changes as follows. (Page 87)
0 : 00. 00 (CAMERA mode only)
Counter value
CLIP 0 : 00 . 00
Displayed when CLIP is selected in the
REC COUNTER item on the settings menu
SW&DISP SETUP screen.
Values are automatically reset when
recording is started, and counter values are
displayed for each individual clip.
TC 12 : 34 : 56 . 01
Time code value (Display time code frame
digits in 4 frames when 4P is set, and in
30 frames when any other format is set.)
UB 12 34 56 78
User information
No display:
Data is not displayed.
Resetting the counter
Press the RESET button while the counter is
displayed.
58
Advertisement
Table of Contents
