Table of Contents
Advertisement
Problem
Function display
(Remaining Display,
Counter Display, etc.) is
not displayed.
Problem
The unit arbitrarily stops
recording.
Auto Focus function does
not work.
Audio is not recorded.
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Indication
≥ [CARD & BATTERY] or [OTHER DISPLAY] of the
[DISP SETUP] is [OFF].
≥ Press the COUNTER button to switch the counter display.
(l
75)
Recording
≥ Use an SD card that can be used for motion picture recording.
(l
29)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card.
≥ If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus.
(l
≥ Variable Frame Rate Mode or Interval Recording is enabled.
(l
91, 162)
is displayed and audio is not recorded in Variable
≥
A.REC
Frame Rate Mode.
≥ Audio is not recorded for Interval Recording.
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Record images in Auto Shutter Mode or adjust the shutter
speed to 1/50, 1/60 or 1/100.
- 193 -
Check points
(l
172)
Check points
45, 52)
(l
42)
Advertisement
Table of Contents
