Functional Specification; The "Cool Roadrunner Ii" At A Glance - Lippert PC/104-Plus Technical Manual

Technical Manual PC/104-Plus "Cool RoadRunner II" Version 1.16

1 Functional specification

The "Cool RoadRunner II" is an "All-in-one" CPU board with on-board 10/100 BaseT
Ethernet interface and graphic acceleration. The CPU is an x86-compatible 64-bit micro-
processor with sixth generation features and is available with speeds up to 300 MHz. The
graphic interface supports all kinds of LCD and TFT Flat Panels and complies with the or-
dinary SVGA standard. It includes 2 Mbytes graphic memory and has a maximum resolu-
tion of 1280 x 1024, 16.7 million colors. An Audio interface with two lines in and out each
and a microphone line is supported. Memory is expandable up to 512 Mbytes with 3.3V
SDRAM SODIMMs (144p.). The board conforms to the official PC/104Plus Specification.

1.1 The "Cool RoadRunner II" at a glance

CPU:
National Geode™ MMX™ with I/O Companion CX5530™
Cache Memory:
16 KB unified L1 Write-Back Cache
No L2 cache subsystem can be installed
Main Memory:
Supports a 64-bit memory bank using single- or double-sided 144-pin SO
DIMM modules up to 512MB SDRAM
Extension slots:
1x 32-bit PC/104Plus slot
1x 16-bit PC/104 slot
© LIPPERT Automationstechnik GmbH • Hans-Thoma-Str. 11 • 68163 Mannheim • Tel: 0621/43214-0 • Fax: 0621/43214-30
April 2004 Page 5 of 42