Bosch D9412GV2 Troubleshooting Manual page 78

D9412GV2/D7412GV2 | Troubleshooting Guide | 3.0
Figure 33: Connection Diagram—NetCom System using DX4020
4
1 - Bosch D9412G is used as an example
2 - D8103 or D8109 Enclosure
3 - Battery
4 - To AC Transformer
Figure 34: Connection Diagram—NetCom System using D9133TTL-E
4
1 - Bosch D9412GV2 is used as an example
2 - D8103 or D8109 Enclosure
3 - Battery
78
1
F01U003643C
Incorrect wiring will damage this
eq uipment.
LEDs Off When Normal D9412GV2
Suitable for dry indoor use only.
Charging Status
YEL Devices powered by the AUX power
output must be supervised .
Digital Alarm Communicator Transmitter
RED Low Battery - 12.1 VDC Refer to D9412GV2/D7412GV2 Approved Applications Compliance Guide (P/N: F01U003639___)
For System Wiring Diagram, Issue A
10.2 VDC - Battery Load Shed Refer to D9412GV2/D7412GV2 Approved Applications Compliance Guide (P/N: F01U003639___)
For Compatible Smoke Detectors
POWER SUPPLY REQUIREMENTS
CLASS 2 TRANSFORMER The Power Supply provides a maximum of 1.4 Amps for the Control Panel and all
16.5 VAC 40 VA 60 Hz Accessory Devices. For System Loading, refer to D9412GV2/D7412GV2
Model D1640
Operation and Installation Guide (P/N: F01U003641___).
Internally Fused - Do not short
Requires Unswitched Outlet All external connections except Terminal 5 (battery positive) are inherently power
Do not share with other equipment limited. Requirements for battery standby time might reduce allowable output.
CAUTION:
See D9412GV2/D7412GV2 Operation and Installation Guide
+ AUX POWER
(P/N: F01U003641) for Power Requirements relating to Terminals 6 and 7 .
WARNING!
BATTERY NEGATIVE ONLY
CAUTION: Avoid damage to Panel. Multi-Battery installation requires Battery: Replace every 3 to
Do not connect 24 V to terminals. Model D122/D122L Dual Battery 5 years with one or two Model
Maximum charging current 1.4 A
Harness. Improper installation can D126 12V 7Ah or D1218
BATTERY POSITIVE ONLY
be a fire hazard. 12V 18Ah Lead Acid Batteries.
This equipment should be installed in accordance with the NFPA 70 (National Electrical Code)
PROGRAMMABLE
RELAY A and NFPA 72 (National Fire Alarm Code) for Local, Central Station, Remote Station, Proprietary and
ALARM OUTPUTS
Household Fire Warning Systems and under the limits of the Local Authority Having Jurisdiction
Terminals
(National Fire Protection Association, Battermarch Park, Quincy, MA 02269). Printed information
6 and 7
RELAY B
describing proper installation, operation, testing, maintenance, evacuation planning and repair
service is to be provided with this equipment.
SWITCHED AUX
Terminal D9412GV2 Control/Communicator is UL Listed For Central Station, Local, Remote Station and
RELAY C Household Fire Alarm, and Central Station, Local, Police Station Connect, Household Burglar Alarm
8
and Encrypted Line Security when communicating via a network.
System is intended to be checked by a Qualified Technician at least every 3 years.
COMMON The types of initiating circuits the panel has been approved for are A, M, W, SS.
EARTH GROUND
GROUND FAULT DETECT
Point 1 Point 2 Point 3 Point 4 Point 5 Point 6
Enabled
Disabled
ON when
PHONE co mmu nicat ing
RED LED
OFF when idle
PHONE LINE SEIZED
11 12 13 14 15 16 17 18
TIP RIN G
TELCO CO RD
MODEL D161
PHO NE LIN E
SEIZED
TIP RING
TELCO
-
+
7
3
1
F01U003643C
Incorrect wiring will damage this
equipment.
LEDs Off When Normal D9412GV2
Suitable for dry indoor use only.
YEL Charging Status Devices powered by the AUX power
outpu t must be supervised.
Digital Alarm Communicator Transmitter
Low Battery - 12.1 VDC
RED Refer to D9412GV2/D7412GV2 Approved Applications Compliance Guide (P/N: F01U003639___)
For System Wiring Diagram, Issue A
Disable all except Battery
10.2 VDC - Battery Load Shed Refer to D9412GV2/D7412GV2 Approved Applications Compliance Guide (P/N: F01U003639___) Charging and Programming
For Compatible Smoke Detectors
POWER SUPPLY REQUIREMENTS PERIPHERAL DEVICE CONNECTIONS
CLASS 2 TRANSFORMER The Power Supply provides a maximum of 1.4 Amps for the Control Panel and all RED
16.5 VAC 40 VA 60 Hz
Accessory Devices. For System Loading, refer to D9412GV2/D7412GV2
Model D1640
Operation and Installation Guide (P/N: F01U003641___).
Internally Fused - Do not short
All external connections except Terminal 5 (battery positive) are inherently power
Requires Unswitched Outlet YELLOW
Do not share with other equipment limited. Requirements for battery standby time might reduce allowable output.
CAUTION:
See D9412GV2/D7412GV2 Operation and Installation Guide
+ AUX POWER
GREEN
(P/N: F01U003641) for Power Requirements relating to Terminals 6 and 7 .
WARNING!
BATTERY NEGATIVE ONLY
Multi-Battery installation requires Battery: Replace every 3 to BLACK
CAUTION: Avoid damage to Panel.
Do not connect 24 V to terminals.
Model D122/D122L Dual Battery 5 years with one or two Model
Maximum charging current 1.4 A Harness. Improper installation can D126 12V 7Ah or D1218
N.F.P.A.
BATTERY POSITIVE ONLY be a fire hazard. 12V 18Ah Lead Acid Batteries. Style 3.5
Signaling
This equipment should be installed in accordance with the NFPA 70 (National Electrical Code)
PROGRAMMABLE Line
RELAY A
ALARM OUTPUTS and NFPA 72 (National Fire Alarm Code) for Local, Central Station, Remote Station, Proprietary and Circuits
Household Fire Warning Systems and under the limits of the Local Authority Having Jurisdiction
Terminals
(National Fire Protection Association, Battermarch Park, Quincy, MA 02269). Printed information
6 and 7
RELAY B
describing proper installation, operation, testing, maintenance, evacuation planning and repair
SWITCHED AUX service is to be provided with this equipment.
Terminal D9412GV2 Control/Communicator is UL Listed For Central Station, Local, Remote Station and
RELAY C
8 Household Fire Alarm, and Central Station, Local, Police Station Connect, Household Burglar Alarm
and Encrypted Line Security when communicating via a network.
System is intended to be checked by a Qualified Technician at least every 3 years.
The types of initiating circuits the panel has been approved for are A, M, W, SS. ZONEX POWER +
COMMON
VOLTAGE RANGES
Open 3.7 - 5.0 VDC
ZONEX COMMON
EARTH GROUND Normal 2.0 - 3.0 VDC
Short 0.0 - 1.3 VDC
GROUND FAULT DETECT
Point 1 Point 2 P oint 3 Point 4 Point 5 Point 6 Point 7 Point 8 Point 8
Enabled
S3 Option
Disabled
ON when Closed = 1KW EOL
PHONE communicati ng Normal Operation
RED LED
OFF wh en idle
Open =AB-12 UL
PHONE LINE SEIZED
Bell Box 220 KW
TIP RING 11 12 13 14 15 16 17 18 19 20 21 22
TELCO CORD GRN
MODEL D161
PHONE LINE
SEIZED
TIP RING
TELCO
-
+
3
Troubleshooting
5
6
SDI Connector
Reset Pin
Disable all except Battery
Charging and Programming
PERIPHERAL DEVICE CONNECTIONS
RED POWER +
YELLOW DATA BUS A
GREEN DATA BUS B
BLACK COMMON
N.F.P.A. ZONEX OUT 1
Style 3.5
Signaling
Line
Circuits ZONEX IN 1
ZONEX OUT 2 26
ZONEX IN 2 25
24
ZONEX POWER +
VOLTAGE RANGES
Open 3.7 - 5.0 VDC
ZONEX COMMON 23
Normal 2.0 - 3.0 VDC
Short 0.0 - 1.3 VDC
Point 7 Point 8 Point 8 D5200/D5360
PROG CONN
S3 Option
Closed = 1KW EOL
Normal Operation
Open =AB-12 UL
Bell Box 220 KW
19 20 21 22
GR N
5 - DX4020 Network Interface Module (not in scale
with control panel
6 - Location of DX4020 in control panel enclosure
7 - Non-power limited area, all power wiring must
remain out of this area
8 - To Ethernet network
SDI Connector
Reset Pin
POWER +
DATA BUS A
DATA BUS B
COMMON
ZONEX OUT 1
ZONEX IN 1
ZONEX OUT 2 26
ZONEX IN 2 25
24
23
D5200/D5360
PROG CONN
2
4 - To AC Transformer
5 - D9133TTL-E Network Interface Module (not in
scale with control panel)
6 - To Ethernet network
Bosch Security Systems, Inc. | 11/05 | F01U011024B
8
2
5
6