Precaution When Removing Optical Pick-Up Block Or Dmb-Fit Board; How To Eject The Disc When Power Switch Turns Off - Sony SA-WSF200 Service Manual

HCD-F200/F500

PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD

CAUTION
 Be sure to execute a solder bridge as a measure against
static electricity when removing the OP block (DVBU101)
or DMB-FIT board. (Otherwise, the OP block will be destroyed.)

HOW TO EJECT THE DISC WHEN POWER SWITCH TURNS OFF

Note: Please take out the DVD mechanism block from a set.
Please rotate the pully in the direction of the arrow after removing mechanism deck,
and eject the disc.
6
two claws
disc
Lift up the FFC holder.
– DVD MECHANISM BLOCK Bottom view –
– DVD MECHANISM BLOCK Bottom view –