3-5.
OPTICAL PICK-UP BLOCK
Note: A screw hole of this screw tends to be damaged,
so please be careful about the installation time
and the time of removal.
Note: Please spread a seat under a set
not to injure front panel assy.
3-6.
KEY-R/FL/KEY-L/USB BOARD
Note: These boards can be in any order removed.
wire (flat type) (17 core)
(CN806)
harness
(FL board: CN808/KEY-R board: CN881)
two screws (BVTP2.6)
screw (BVTP2.6)
ground plate (PWB)
KEY-R board
four insulator screws
insulator
insulator
sheet
screw (BVTP2.6)
ground plate (PWB)
unweaved cloth
screw (BVTP2.6)
ground plate (PWB)
RB five screws (BVTP2.6)
RT FL board
insulator
optical pick-up block
connector
wire (flat type) (7 core)
(KEY-L board: CN871/FL board: CN807)
RE three screws
(BVTP2.6)
sheet
Note: Please spread a seat under a set
not to injure front panel assy.
– rear view –
HCD-F200/F500
insulator
– rear view –
RG ground plate (USB-2)
RH KEY-L board
RI two screws
(BVTP2.6)
RM USB board
RL ground plate
(USB)
RK gasket (USB)
13