Ethernet Port - TP-Link TL-WPA4220 User Manual

Chapter 1 Get to Know Your Powerline Extender
Press and hold the button for at least 5 seconds to turn the wireless function on or off.
The wireless function is on by default. You can turn them off at night and then on in the
morning by pressing this button.

Ethernet Port

Connect the Ethernet ports to your wired devices, such as a computer, a router
or a game console, via Ethernet cables.
Pair Button
Press and hold the button for 1 second to join a powerline network. Go to To Set Up a
New Secure Wireless Network for more information.
Press and hold the button for about 8 seconds until the powerline LED turns off to leave
the existing powerline network.
Reset
Press and hold the Reset button for at least 5 seconds to reset the powerline extender
to factory default settings. When Reset is triggered properly, all LEDs will turn off and
start on again.
Plug
The powerline adapter has a Plug that can be connected to any standard power socket.
Note:
1. The provided plug may differ from the picture due to different regional power specifications.
2. Use the product in below directions.
Or
3. Plug the product directly into a wall socket instead of a power strip.
Wall Outlet Power Strip
5