Upgrade The Firmware; Backup And Restore Configuration Settings - TP-Link TL-WPA4220 User Manual

Chapter 3
3. Select the correct
time zone.
4. Click Save.
3 11 3

Upgrade the Firmware

TP-LINK is dedicated to improving and richening the product features, giving you
a better network experience. We will release the latest firmware at TP-LINK official
website, you can download the latest firmware file from our website:
and upgrade the firmware to the latest version.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to System Tools
3. Go to www.tp-link.com. Download the latest firmware file for the extender.
Note: The upgraded firmware version must correspond to the hardware.
4. Click Browse to locate the downloaded new firmware file, and click Upgrade.
5. Wait a few minutes for the upgrading and rebooting.
Note:
1. Before upgrading the firmware, it's better to back up your current settings.
2. During the upgrading process, do not turn off or reset the extender.
3 11 4

Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the extender. You can
back up the configuration file to your computer for future use and restore the extender
to a previous settings from the backup file when needed. Moreover, if needed, you can
erase the current settings and reset the extender to the default factory settings.
To backup configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to System Tools
End date and time when daylight saving time ends at your local
> Firmware Upgrade
> Backup & Restore
Configuring via Web Management Interface
page and confirm the
page.
www.tp-link.com
Hardware Version.
28