Wireless Clients; Led Schedules - TP-Link TL-WPA4220 User Manual

Chapter 3
Channel Width: Select the channel width. The default setting is Auto, which can adjust
the channel width for your clients automatically.
Channel: Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access
point.
Transmit Power: Select the level of transmit power. We recommend you choose
have the best signal strength.
3 5 2

Wireless Clients

Follow the steps below to view detailed information of all wireless clients connected to
the extender.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Wireless > Clients
3. Now you can view the detailed information, including MAC address, connected
wireless band, security option as well as the packets transmitted.
Tips: You can also see the wireless details by clicking the wireless clients icon on Status>
Clients.
3 6

LED Schedules

I want to:
How can I
do that?
page.
Automatically turn off LEDs at times when I do not want light in
my room.
For example, I want to turn LEDs off everyday from 00:00am to
7:00am.
1 Connect to the powerline extender wirelessly. Visit
tplinkplc.net and log in with the username and password you
set.
2 Go to Device Settings
3 Toggle On to enable the LED Scheduler.
Configuring via Web Management Interface
> LED Schedules.
High to
Wireless
http://
18