Table of Contents
Advertisement
Chapter 1
1. 2. 1.
LED Explanation
You can check the extender's working status by following the LED Explanation table.
Name
(RE)
2.4GHz/5GHz
Power
1. 2. 2.
Port and Button Description
Ports or Buttons
WPS Button
Power Button
LED Button
Reset (Hole)
Ethernet Port
Status
The extender is connected to your router's wireless network
Solid blue
and is in a suitable location.
The extender is experiencing poor signal strength. Try
Solid red
relocating it closer to your router.
Flashing
WPS connection is being established.
Off
No wireless connection is established.
The extender is connected to the 2.4GHz/5GHz wireless
On
network of your host router.
Off
No wireless connection has been established.
On
The extender is on.
Flashing
The extender is starting up.
Off
The extender is off.
Press the WPS button on your host router, and immediately press the WPS
button on the extender. The LED
blue, indicating successful WPS connection.
Press the Power button to turn on or off the extender.
Press the LED button to turn on or off all the LEDs.
Use a pin to press and hold the Reset button until all the LEDs turn on
momentarily to reset the extender.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.
Get to Know About Your Extender
Indication
Description
of the extender should change to solid
4
Advertisement
Table of Contents
