Led Explanation; Port And Button Description - TP-Link RE205 User Manual

Chapter 1
1 2 1

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
Power
Signal
2.4GHz
5GHz
1 2 2

Port and Button Description

Ports or Buttons
WPS Button
RESET Button (Hole)
Ethernet Port
Status
On/Off The extender is on or off.
Blinking The system is starting up or firmware is being upgraded.
The extender is connected to your router's wireless network
Solid Blue
and is in a suitable location.
The extender is experiencing poor signal strength. Try
Solid Red
relocating it closer to your router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
The extender is connected or not connected to the 2.4GHz
On/Off
wireless network of your host router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your host router.
Press the WPS button on your host router, and immediately press the WPS
button on the extender for 1 second. The Signal LED of the extender should
change to solid on, indicating successful WPS connection.
Use a pin to press the button for 1 second to reset the extender.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.
Get to Know About Your Extender
Indication
Description
4