Renault CLIO Driver's Handbook Manual page 33

SEAT BELTS
(continued)
3
Adjusting the height of the
seat belt
Move button 3 to select the position you
require so that shoulder strap 1 is worn
as described above.
Make sure that the seat belt is locked
in position correctly after you have ad-
justed it.
1
4
6
2
To fasten
Unwind the belt slowly and smoothly
and click buckle 4 into catch 6 (check
that it is locked by pulling on buckle 4).
If the belt jams before it clicks in, allow
it to return before attempting to unwind
it again.
If your seat belt becomes completely
jammed:
– pull the belt slowly but firmly so that
just over 3 cm unwinds;
– then allow the belt to rewind auto-
matically;
– unwind it again;
– if the fault is still present, contact a
RENAULT Dealer.
5
ç
Driver seat belt
6
reminder warning light
If the driver's seat belt is not fastened
the light remains lit when the vehicle
is started, then when the car reaches
a speed of approximately 6 mph
(10 km/h), it flashes and a beep sounds
for about 90 seconds.
Unlocking
Press button 5 on buckle 6 and the seat
belt will be rewound by the inertia reel.
Guide the buckle to help the operation.
1.25