Renault CLIO Driver's Handbook Manual page 31

FRONT SEATS
(continued)
4
5
To tilt the seatback
Turn control knob 5 and tilt the seat-
back to the desired position.
To adjust the lumbar support
on the driver's seat
Pull handle 4.
We would advise you not
to recline the seatbacks too
far to ensure that the effec-
tiveness of the seat belts is
not reduced.
6
Access to the rear seats
three-door versions
Lift handle 6, tilt the seatback and slide
the seat forwards.
To return the seat to its original position
(memorised position depending on ve-
hicle):
– slide the seat backwards until it
locks;
– lift the seatback until it locks.
Make sure the seat is correctly locked
in position.
When a person, an object or a child
seat prevents the front seats from lock-
ing, perform the following operations:
– ask all of the passengers to leave
the vehicle and remove any bulky
objects from the rear seats;
– lock the seat(s) in the initial position
again;
– move the seat(s) forwards in order to
create sufficient space;
– ask the passengers to get back into
the vehicle, and refit the child seat or
objects on the rear seats.
Check that nothing prevents
the front seat from locking.
If necessary, remove any
obstructive objects.
Repeat the above until the seat is
locked correctly.
Before starting the vehicle and be-
ginning your journey, ensure that
the seats are locked correctly.
Risk of seat moving on its runners
during vehicle acceleration or brak-
ing.
1.23