Fitting A Radio - Renault CLIO Driver's Handbook Manual

FITTING A RADIO

1
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connec-
tions are located behind it.
– In all cases, follow the manufacturer's instructions carefully.
– The specifications of the brackets and wires (available at RENAULT accessory outlets) vary depending on the equipment
level of your vehicle and the type of radio.
Contact your RENAULT Dealer to find out the correct part number.
– No work may be carried out on the vehicle's electrical circuit, except by RENAULT network engineers: an incorrectly con-
nected system may result in damage being caused to the electrical equipment and/or the components connected to it.
2
Tweeter speakers
Using a flat-blade screwdriver or simi-
lar, unclip grille 2 to access the speaker
wires.
3
Door speakers
Using a flat-blade screwdriver or simi-
lar, unclip grille 3 to access the speaker
wires.
5.33